Mr. Steam Steam@Home Series 6kW Steam Shower Generator Package | SAH6000

The Steam at Home package comes with a steam generator, chrome steam head with acrylic shield, polished chrome 20-minute SteamStart control, and 30-foot cable to bring the luxury of steam bathing into your life affordably.

When engineering this generator, Mr. Steam focused on ensuring the most pleasant and consistent experience for bathers. The Mr. Steam SAH 6000 steam generator is constructed of durable stainless-steel throughout and runs off an advanced printed circuit board. The unit includes a full port drain valve and ASME safety valve.

The compact size of the SAH6000 steam shower unit allows the generator to fit conveniently out of sight. The unit can be installed up to 60 feet from the steam room in vanities, closets, and other similar locations.

Mr. Steam Steam at Home generators use less than one gallon of water during a 20-minute steam bathing session making them both economical and eco-friendly.

The included SteamStart control can be mounted inside or outside the steam shower enclosure based on your preferences.

The Mr. Steam Steam@Home 6000 steam bath generator is available in either 208V (SAH6000B1) or 240V (SAH6000C1), single-phase (1PH) configurations.

All Mr. Steam generators are made in the USA. Steam@Home steam shower systems are UL listed in the USA for your safety.

Features

SAH6000 Generator

• Unitized stainless steel reservoir
• Durable electronic components
• Electronic water-level control system
• Stainless steel design inside and out
• Low voltage safety control circuits
• Built in 24-volt circuit
• ASME safety valve
• Full port drain valve
• UL/CSA/CE listed

SteamStart Control

• On/Off operation
• 20-Minute run cycle non-adjustable
• Low profile
• Polished Chrome trim
• Inside/outside the steam/shower enclosure installation
• Low voltage operation

Cool-to-the-Touch Steamhead

• Quieter operation
• Integral reservoir for a scented steam bath
• Low profile and sleek design
• Polished Chrome finish

Acrylic Shield

• Clear Lexan construction, 1/8” thick, transparent look
• Measures 4-3/8" in diameter and is 1/2" deep
• Integral, 1-5/8” diameter mounting hole

Includes

• 6.0KW Steam bath generator
• SteamStart surface-mounted control, 1-1/2” diameter, 1/8” deep
• 3-Pin Control cable, 30’ long, hard-wired to control with plug-in connector
• Cool-to-the-Touch steamhead, 1/2” NPT, 3-1/16” diameter, 1-13/16” deep
• Acrylic shield, 4-3/8" diameter, 1/2" deep
• RTV silicone sealant, .5 ounce tube
• Installation and operation manual
• Limited warranty

Specifications

MR.STEAM Warranty & Guides

Limited Lifetime Warranty for MrSteam Residential Steambath Generator Products Installed in the United States.

Limited Lifetime Warranty for MrSteam® Residential Steambath Generators

MrSteam® warrants that every MrSteam Residential Steambath Generator (“Generator”) will be free from defects in materials and workmanship for its lifetime. MrSteam will repair or replace (at its option) a Generator which fails to conform to this warranty.

Warranty Service within 2 years from date of purchase

If the warranty claim is made within two years from the date of purchase of the Generator, MrSteam will provide free in-home warranty service, parts and labor.

Warranty Service after 2 years from date of purchase

If the warranty claims is made after two years from the date of purchase of the Generator, MrSteam will provide a life- time warranty on parts.

To return a Generator to MrSteam, a Return Authorization Number (RMA) must be issued. An RMA and other required information must be written on the return pack- aging as instructed by MrSteam.

If MrSteam issues an RMA, MrSteam will pay the freight charges to ship the Generator to MrSteam and for MrSteam to return a repaired or replacement Generator

Shipping & Returns

What is the order processing and handling time?

All orders are processed within 1 - 2 business days. 

What is the order transit time?

Order transit time is typically between 5 - 7 business days. 

What is your order cut off time?

Order cut off time is 3:00PM (GMT- 05:00) Eastern Standard Time

All orders placed after this time will be processed on the next business day.

Where do you deliver?

We deliver to the United States of America only.

Order confirmation 

As soon as we receive your order, we'll send out confirmation to your email address, this just means we've received your order in our system and we've pre-authorised your payment method ready for your purchase. We check with our warehouse or suppliers to make sure that your item(s) are available and can be despatched as soon as possible. If your item(s) are available for shipping (within 5 business days), we'll process the charges and prepare to ship your order. 

Once your order has been despatched you will receive an email with your tracking number, where you can track the journey of your product(s) and see status updates. If you do not receive a tracking number within six business days please email us at info@inessencehomes.com. We are here to help.

Cancellations & Refunds: At In-Essence Homes, we pride ourselves on having the best return policies in the industry. Cancel your order any time before it ships completely free of charge (exceptions apply such as custom orders, see below). 

If you wish to cancel an order please take the following steps:

Send an email to info@inessencehomes.com or call us during our business hours at 1-(307) 218 7280

Include your order number which can be located in your order confirmation email. Request a cancellation and our customer support team will review and respond within 24 hours.

Cancellations of Custom Orders

Custom or made to order products cannot be cancelled or refunded as these products are put into production specifically for your order.

These units, are custom made to your specifications or created once you order. Once you place your order they start building your unit. Your warranty will guarantee you a fully functional and operational product. If it is not clear whether your order is custom or made to order, please message or call us. 

All sales are final for Custom made and Made-to-order products.

Shipped Product(s):

Once your order ships it is subject to a 20% restocking fee.

If you decide to cancel the order once it ships, or you refuse the delivery or do not make a delivery appointment, the order will be returned to the warehouse and treated as a return. 

You will be refunded minus the net 20% restocking fee as listed above. 

If you decide to refuse a shipment due to damage, it will not be treated as a return but will be subject to our damaged products policy.

SHIPPING

We promise to do our best to get your order to you as soon as possible. We know customer satisfaction is key and want to ensure you receive your order as quickly as possible. After completing your order, we will provide estimated shipping times based upon what our suppliers and freight companies tell us, and those estimated shipping times may change or vary without notice (due to supply chain issues, the steel mills behind on making metal, the manufacturers delayed because of the mills, the overwhelmingly high demand on shipping, factory/warehouse and dock workers and so on). 

We have tracking information available so you can obtain up-to-the-minute updates on the status of your delivery. If you somehow do not receive tracking information on your order, please contact info@inessencehomes.com and we will make sure to get it to you.  

Order delays have proven to be unavoidable and outside of In-Essence Homes control. While this might be frustrating, we ask you to please be patient and understanding with us in these tough times.  We thank you for your business and appreciate your patience.

EXCHANGE POLICY

In order to qualify for an exchange it must be requested within 30 days of the delivery date. We cannot exchange products beyond the 30 day mark.

Please send an email to info@inessencehomes.com  or call us during our business hours at 1-(307) 218 7280

Include your order number which can be located in your order confirmation email. Request an exchange and our customer support team will review and respond within 24 hours.

A restocking fee of 20% will be applied to exchanges

In the event of an exchange, the cost of return shipping and the cost of the new product shipping is the responsibility of the customer.

Please note our Exchange Policy only applies to uninstalled, unused product(s) in their original packaging with the box and pallet. If you have used or installed the product it cannot be exchanged. 

How we process an exchange

• Once requested, our customer support team will respond within 24 hours
• If acceptable, arrangements will be made to pick up the product
• The warehouse team will receive and inspect the product to ensure it is in a new and unused condition
• The customer will receive a refund minus the restocking fee
• The customer makes a new order for the exchange item

DAMAGED PRODUCT POLICY

If you receive a damaged product please follow the steps below:

If there are damages to the box or exterior - Please inspect the packaging of your item(s) when they arrive, if you notice any damage to the box, take clear photos of the damaged box, refuse delivery, then you should make note of the damages with the delivery driver on the Bill of Lading or Freight bill. Please email us the details of the damage and a brief description to info@inessencehomes.com

If there are no damages to the box - please inspect the package and contents immediately. If there are damages to the product please email info@inessencehomes.com with your order number, clear photos and videos of damage, box and SKU, along with a brief description of the damage and we will process an insurance claim on your behalf. 

Photos and videos must be sent for freight damage within 24 hours of arrival or the freight damage claim will not be valid. Any punctures, or visible signs of exterior damage must be reported within 24 hours. 

Please note any failure to report damage within 24 hours of the delivery of the product will result in your claim being denied.

MISSING ITEMS OR PARTS

If you received missing item(s) or part(s) within your order, please contact us immediately at info@inessencehomes.com and include your order confirmation number, photos or videos of the product delivered and a brief description of the missing item(s) or part(s) and we will respond within 24 hours.

WRONG PRODUCT

If you have received the wrong product. Please email info@inessencehomes.com with your order number, clear photos and videos of the wrong product along with a brief description of the product you should have received and we will respond within 24 hours.

If you have any questions please contact info@inessencehomes.com we are glad to help.

BY USING THE SITE, YOU AGREE TO THESE TERMS OF USE; IF YOU DO NOT AGREE, DO NOT USE THE SITE.

Our Shipping Partners

About MR.STEAM

Steam is in MrSteam’s DNA. We have over 100 years of experience in steam manufacturing, which means we know a thing or two (or hundreds) about making the highest quality steam shower products. MrSteam is not just about the products it offers; it is about a mission we want to share with people around the world. One that reminds, empowers and enables us all to be healthy, live happy, and feel good. That’s why we always say, “we feel good when you feel good.”